Scootopia made Lambretta 185cc barrel & piston kit.
Well finally, it’s here! The 185cc barrel kit has been faultlessly used and abused by the Scootopia race team in their endurance events, along with input and test development from Allstyles Scooters in Portsmouth.
Scootopia made Lambretta 185cc barrel & piston kit.
Well finally, it’s here! The 185cc barrel kit has been faultlessly used and abused by the Scootopia race team in their endurance events, along with input and test development from Allstyles Scooters in Portsmouth.
The kits used for the race team have been tuned by JB Tuning – the kit on sale here is not as tuned and is more of an around city/town kit with plenty of torque, this is not a kit that will give you the fastest scooter on the block.
The barrel is nicasil plated aluminium with an aluminium head (there’s no need for a head gasket for the kit).
This kit is can be fitted to any Lambretta Series 1,2,3 OR DL/GP 125/150 & 175 engine case. We have developed it with the standard crank, 22mm carb and clubman exhaust in mind.
The kit also comes with High Tensile Cylinder Studs, Exhaust Studs, Inlet Studs, Nuts, Washers, Cylinder Spacer and Gaskets.
Scootopia 186cc Cylinder Kit – I008
£0.01
Scootopia made Lambretta 185cc barrel & piston kit.
Well finally, it’s here! The 185cc barrel kit has been faultlessly used and abused by the Scootopia race team in their endurance events, along with input and test development from Allstyles Scooters in Portsmouth.
Out of stock
Description
Scootopia made Lambretta 185cc barrel & piston kit.
Well finally, it’s here! The 185cc barrel kit has been faultlessly used and abused by the Scootopia race team in their endurance events, along with input and test development from Allstyles Scooters in Portsmouth.
The kits used for the race team have been tuned by JB Tuning – the kit on sale here is not as tuned and is more of an around city/town kit with plenty of torque, this is not a kit that will give you the fastest scooter on the block.
The barrel is nicasil plated aluminium with an aluminium head (there’s no need for a head gasket for the kit).
This kit is can be fitted to any Lambretta Series 1,2,3 OR DL/GP 125/150 & 175 engine case. We have developed it with the standard crank, 22mm carb and clubman exhaust in mind.
The kit also comes with High Tensile Cylinder Studs, Exhaust Studs, Inlet Studs, Nuts, Washers, Cylinder Spacer and Gaskets.
Related Products
0.5mm Alloy Cylinder Base Gasket – O015
£5.99Exhaust Stud Kit – KK050
£3.99Scootopia Cylinder Studs & Nuts Set – K025
£0.01